Print Back
Larger or small tank sizes available as needed
Unit of Measure

Specifications

Tank Capacity

N/A 860 gal3255 L

Filter Type

N/A 3M Cuno cartridge filter housing 3M Micro-Klean III resin bonded filter cartridges

Flow Rates

N/A up to 520 gpmup to 1968 L/min

Standard System Features

Standard System Features

N/A
  • Units are fully tested at Roeslein Modular Fabrication Facility prior to shipping
  • Automatic changeover from Primary to Secondary Cuno Filters
  • Automatic constant supply pressure control to Bodymakers
  • End suction centrifugal main tank pumps
  • Vertical centrifugal pumps at Sump Tank
  • Air Operated Double Diaphragm Pump (AODDP) at Sump Tank for pit/trench scavenging
  • Dosatron positive displacement metering unit for metering Neat Oil with make-up/fill water
  • ifm efector sensors
  • Paul Mueller or Tranter plate and frame heat exchanger(s)
  • Oil Mop LLC rope mop skimmer
  • Two Metering pumps for Biocide and Neat Oil
  • Waste oil separation tank integrated into the top of the main tank with underflow weir for separation of coolant from tramp oil
  • Waste Oil collection tank with AODDP for automatic discharge to waste oil hold/collection tank
  • Automatic Blowdown PLC controlled, solenoid valve activated drain, purge and fill for Cuno Filter Housings
  • System with standard tank volume ships in single container

Controls Overview

Controls Overview

N/A
User control ability
  • Enable and Stop the system
  • Reset Drive/Motor faults
  • Review the overall system status
    • Tank levels & temperature
    • Drive/Motor status
    • Control Valve & Solenoid status
  • Filter s

Controls Filters

Controls - Filters

N/A
User ability
  • Review the differential pressure of the filter in use
  • Reset the status of the filter after cartridge change
Other Features
  • Active Alarm screen
  • Alarm History screen with password protected clearing of ala

Panel Design

Panel Design

N/A
  • Allen-Bradley HMI and Drives
  • Single NEMA4/12 Control Panel with air conditioner mounted on main skid
  • Variable Speed Drives for all main pumps
  • Local Sump Tank control station with pump motor Drives
  • Ethernet communica

Tramp Oil Control / Removal Options

Tramp Oil Control / Removal Options

N/A
  • Micro Dispersed Air Flotation
    • Air bubbles are injected at the bottom of the unfiltered coolant tank to improve the raising of tramp oil droplets to the surface
  • Extended Tank or Satellite Tank
    • Increased residence time
  • Main Tank Coalescer
    • Improved tramp oil removal while retaining more "good" coolant
  • Suparator Tank - Enhanced Tramp Oil Removal
    • Pro-active tramp oil separation through Suparator Tank with increased residence time and oil removal through application of Bernouilli's principle. Removes thin oil films while coalescers require the development of a thick oil film.

Parts

Bearing Parts

N/A SCJT 1/2”, 2 Bolt Flange, 0.50 Bore Bearing (QUOTE)
YCJT 5/8”, 2 Bolt Flange, 0.63 Bore Bearing (QUOTE)
VCJT 3/4”, 2 Bolt Flange, 0.75 Bore Bearing (QUOTE)
SCJT 1”, 2 Bolt Flange, 1.00 Bore Bearing (QUOTE)
SCJT 1 1/4” S, 2 Bolt Flange, 1.25 Bore Bearing (QUOTE)
VCJT 1 1/4” S, 2 Bolt Flange, 1.25 Bore Bearing (QUOTE)
VCJT 1 1/2”, 2 Bolt Flange, 1.50 Bore Bearing (QUOTE)
SCJT 1/2”, 2 Bolt Flange, 0.50 Bore Bearing (QUOTE)
YCJT 5/8”, 2 Bolt Flange, 0.63 Bore Bearing (QUOTE)
VCJT 3/4”, 2 Bolt Flange, 0.75 Bore Bearing (QUOTE)
SCJT 1”, 2 Bolt Flange, 1.00 Bore Bearing (QUOTE)
SCJT 1”, Discontinued Part Number (QUOTE)